Miditemp MP 11 Manuel d'utilisateur télécharger pdf (Page 73)

F7H

SYSEX F0H 41H 00H 42H 12H

40H 2pH 54H vv xx

F7H

CC2 lfo1 pitch depth (0-600 cents) (default=00H) (note 3) GS

SYSEX F0H 41H 00H 42H 12H

40H 2pH 55H vv xx

F7H

CC2 lfo1 tvf depth (default = 0H) (note 3) GS

SYSEX F0H 41H 00H 42H 12H

40H 2pH 56H vv xx

F7H

CC2 lfo1 tva depth (0-100%) (default = 0H) (note 3) GS

Notes :

1. NRPN sending method : CTRL#99=high byte, CTRL#98=low byte, CTRL#6=vv. Example : NRPN

0108h = 40h -> CTRL#99=1, CTRL#98=8, CTRL#6=64.

2. x or xx means « don’t care »

3. Cross system exclusive :

Address can be 040h xxh xxh or 050h xxh xxh

If addresse=040h xxh xxh : system exclusive applies to midi port 1 (midi channels 0-Fh) if received

on midi port1 , applies to midi port 2 (midi channels 10-1Fh) if received on midi port 2.

If addresse=050h xxh xxh, cross system exclusive : applies to port 2 if received on port1, applies to

port 1 if received on port2

4. Non cross system exclusive applying only on receiving port :

System exclusive applies to midi port 1 (midi channels 0-Fh) if received on midi port1.

System exclusive applied to midi port 2 (midi channels 10-1Fh) if received on midi port2.

5. Non cross system exclusive applying on both ports :

System exclusive will be applied to all midi channels (0-1Fh). Can be received on port 1 or port 2

indifferently.

This is the case for all system exclusive concerning reverb and chorus because reverb and chorus

are the same for both ports 1 and 2.

6. Drumset edit Nrpn : 4 different drumset edit tables are implemented :



1 for midi port 1 channel 10



1 for midi port 2 channel 10



1 for midi port 1 channels 1-9 or 11-16 : for all these channels, edit table is the same



1 for midi port 2 channels 1-9 or 11-16 : for all these channels, edit table is the same

MIDI Implementation

1 2 ... 68 69 70 71 72 73 74 75 76

Pas de commentaire

Miditemp MP 11 Manuel d'utilisateur Page 73